3D Finishing: Melissa Shirley Sewing Bird Part 1

Materials used:

Stitched and blocked needlepoint pieces
2 Copies of each stitched, blocked pieces
Backing fabric: I used two
Ultra-suede for the wings
Cotton for the rest: fat quarter would be ample
Batting: low loft for wings and body
Batting: craft weight for sides and body
Fiber Fill
Sewing thread to match fabric
Illustration board
Paper scissors
Glue
Cording
Usual sewing supplies

20160712 a bird yellowI have contemplated how to finish this piece for weeks/months. I should have listened to that little voice in my head that said, “Send it to the finisher.”  But no I just kept looking at it and I had a friend who had stitched one (she sent hers to the finisher) and I figured I could manage this myself. Afterall it was just a stand up without the stuffing… and ornament in 3-D…I can do this.

I had it on the blocking boards for a long time while I mulled over finishing in my mind. Then I got brave and began the process. I mad two copies of each of the blocked pieces.  And then I plunged in…I felt like a kid jumping off the high dive for the first time. Once you get up your courage to climb that ladder you gotta go off the diving board; if you climb down…well you all know what that means when you’re a kid. So off I plunged…

Once I took the plunge it was a long way down to the finish; this project took me at least two weeks to complete. I would breeze right along and then I would hit a rough patch and it would take me a couple days to get through it. I’ll let you know as we go along where, when and why I became frustrated.

blockingI had blocked the pieces. Even though I had stitched the designs on Evertite stretcher bars I still block. I do know some people who adjust and tightened their Evertites and block using them too but I do not.   I use my Marie’s blocking board (if any one has one they don’t want, I will pay to have it shipped to me.)

I also made two copies of the pieces on the printer/copier for patterns. Remember copies of copies are a bit smaller, I think the standard is about 97-98% smaller; so when you make a copy of your stitching it is already a bit smaller.  And sometimes I use more than one copy and so I have a second in reserve in case I need it. It is hard to make a second copy once you have started or cut the first copy.

I started finishing the wings, they were easy; they were like a soft ornament.(see: https://sudukc.wordpress.com/2016/03/23/finishing-ornaments-3-soft-ornaments/) I cut out one of the copies for a pattern of each wing. I colored the edges with my Copic pens (https://imaginationinternationalinc.com/copic/), I don’t like grin through.

I trimmed the canvas to within a 1/2 inch of stitching and clipped the curves.  I finger pressed to the back and used Clover clips to hold in place.  These clips come in several sizes, I like the green jumbos best (http://www.joann.com/clover-12pcs-jumbo-wonder-clips-neon-green/14789036.html). I buy them at JoAnns with my $$ off coupons.

 

I stitch the canvas to the back with a double waxed sewing thread. Always wax your thread…it makes it stronger and it keeps it from twisting and knotting.

I used a small piece of ultra-suede I had to back the wings; I used each stitched wing to cut a backing fabric. I marked the stitched needlepoint onto the wrong side of the fabric and clipped the curves. I cut two pieces of low-loft quilt batting using the patterns I made for the wings. I used one of the quilt battings to stabilize the backing fabric and to give me something to fold the ultra-suede back onto and it also gave me something to baste the fabric in place.

Then I sandwiched all together: needlepoint second batting and backing and pinned together. I stitched the wings. I also decided that there was not enough dimension to the wings so I stuffed them with fiber-fill. I didn’t think I filled them too much but they proved to be a problem later on.

I also made a small cording, joined and stitched it around the wings…The wings were completed and truthfully I think this took me a couple days, but they were no problem.

Next I finished the side straight pieces; one short and one long…these had the decorative flowers stitched on them. I used pretty much the same method I had used finishing the wings without the fiber-fill.

Using the patterns I cut batting for large and small side pieces. I cut the needlepoint to within 1/2 inch of stitching.

I finger pressed the edges to the back mitering the corners around the craft weight quilt batting, pinning in place.

Using a double waxed length of sewing thread I laced the sides together,  starting in the middle and working toward ends and stitching the mitered corners.

Then I cut backing fabric 1/2 inch larger that the needlepoint. I finger pressed and pined to be just slightly smaller than the finished needlepoint. I pressed this in place with my new gadget I purchased some time ago to help with finishing. It’s a Clover Mini Iron with all sorts or attachments. It has a large and small iron head, a ball head (I think for curves, a long thin head (probably for corners and a cutting knife. And I doubt I will ever use the cutting knife since I do not want to gunk up the iron for finishing.

The reason that I stitched these slightly smaller than the needlepoint is because when I assemble the pieces together I am going to join them together through the needlepoint and therefore the lining needed to be slightly smaller because it will be inside the bird.

I stitched the backing to the needlepoint using a single waxed thread.  These pieces went quickly and I thought I was on a roll; then finish came to an abrupt halt.

The bird body gave me some trouble and so if you don’t mind I am going to continue this saga next week., otherwise this post will be way toooooo long. I can give you a hint…I did finish this bird but it took me the better part of a week, a few well-chosen words and a do over. But for now…

Thank you for stopping by, I hope you have time to stitch today!

ttfn…sue

Blue Bird Flowers: More Flowers

I am really not liking these flowers now. I think it is because I am ready to move on to other stitching and the blue bird has a bunch more stitching before it is ready for the finishers.

I was working on a piece at a time but that seems kind of counterproductive. I don’t seem to get into a rhythm, so I’ve sorta decided to work by color and get these flowers stitched.

2015-11-12 BB aThe pink stitches were first in this new method; there was just a single pink flower  (#4) on the large side piece. I stitched the green area in a woven stitch using #4
Kreinik Braid. Truthfully, this is a green no longer being produced, but I think this is an excellent way to use your stash and should I run out of #4 I’m sure I also have a spool of #8 2015-11-12 BB b pinkbraid and who but me is going to notice. In fact if you look at the pictures, the magenta Kreinik I used is Confetti Pink 042 and I believe this is one of the colors Kreinik is phasing out. I happen to love it and have it in every size so if I ran out I used another size. I have even been known to twist ribbon in the needle to use as braid.

But back to the flowers…The border is a Freeform Satin using Neon Rays, so I had to lay the Neon Rays. But the center is my favorite. I love to do French Knots and so both the white and read areas are stitched in French Knots. I used the Confetti Pink 042 first and covered most of the area, then added a few white perle French Knots around the edges.
2015-11-12 BB d redThere are four red flowers: 2 large (#6: one on the wing and one on the large side piece) and 2 small red flowers (#5: one on the large side piece and one on a wing) I’m not wild about all the white around the flowers (see stitch placement picture) so sometimes I just stitch over these areas with the petal color. The small red flower is stitched using all French Knots (yes I am on a roll). I stitched from the center out with yellow floss, Kreinik Confetti Pink 042, and white perle; then added beads.

2015-11-12 BB c redAnd since I am on the French knot making roll, why stop? I decided that since I was not found of doing satin stitch, French Knots on a Stick would do nicely for the petals of the red flowers. In case you hadn’t noticed all the red flowers are really Confetti Pink, and guess what the Needlepoint Police have not shown up at my door yet…and if they do I’m not answering the door!  And yes the centers are filled with more French Knots using green Kreinik, yellow floss and pink beads.

Can you tell I’m losing interest in this piece? I’ll be back next week to finish up the flowers…I am bound and determined to be done with this piece by Thanksgiving…I have too many other canvases to stitch….not to mention the original ideas floating around in my head.

Thank you for stopping by… I hope you find time to stitch today

ttfn…sue

Blue Bird Flowers

Did you think I’d never get back to the flowers? So did I but here we go…

I read all my Ribbon books and decided for now to play it by gut feeling. I’ve gathered up many different types of ribbons type threads (i.e. Kreinik ribbons and Fyre Werks, Neon Rays, Sparkle Rays from Rainbow Gallery) and silk ribbons that were in my stash. The Ribbon books say the ribbon should fit the size of the ground and also the size of the flower being made. Common sizes (from smallest to largest) are 2mm-4mm-7mm and 13mm. All my ribbons are 4mm so I will be limited to their use according to ribbon books. Gathered these up too along with a few beads and metallic braids to add to the mix.

The first flowers I did were ruche ribbons. I found the word “ruche” spelled two different ways; one with a “c” and the other with an “s” and an accent mark over the “e”. I preferred the ruche spelling and so that is what we are using. The “s” spelling reminded me of rush as in hurry up and trust me rushing is not something you want to do when stitching these flowers.

For all the flowers I used a Chenille needle. Two reasons: 1. Wanted to pierce ribbon thread onto the needle and 2. thought if I had to pierce canvas threads would be easier to do so with a chenille needle. And most importantly, it worked for me…ALWAYS do what you are comfortable doing…if you force your needlework you will not like it. Remember this is supposed to be fun!

2015-10-21 BB f ruche

2015-10-21 BB a rucheI did the small red flowers first using Neon Rays (nothing like jumping in feet first) for these red flowers. Neon Rays is hard to control without ruching it …so ruching it just made it more difficult to control.  So I just ruched the thread and piled it on the area and couched it down until I liked it. I added

OLYMPUS DIGITAL CAMERA

a bead and then moved on to the white flowers.  Thank goodness there were only two of these!

I realized I was in much too much of a hurry for this type of stitching; I was rushing the ruching!

2015-10-21 BB c rucheSo I took a deep breath and started the white flowers. I used Sparkle Rays for these flowers and noticed as I was pulling a thread of the
Sparkle Rays that this thread would ruche flat. So I decided to try and place in a controlled manner. I used other needles to place the ruched Sparkle Rays and then using 1 ply of floss couched the ribbon in place. I like this look and 2015-10-21 BB d rucheyou can really see how ruching works. I bet you can control ribbon like this too, will have to try different ways of doing this.

I finished the white flowers  with either green or gold beads. Oh btw, look out needlepoint police; I knotted 2015-10-21 BB e ruchethe ruched thread on the back. I wanted to be sure this thread didn’t come loose on either end. And since I am finishing it too, it is my piece I can do what I want!

Thank you for stopping by… I hope you find time to stitch today!    ttfn…sue

Blue Bird: Sides and wing

I made another creative decision on the bird bodies I made sure the stitches were slanted the same on both sides. I guess I should say I reversed the direction of stitches for one side. Whatever, I did it and it was a conscious decision.

OLYMPUS DIGITAL CAMERA

one side

OLYMPUS DIGITAL CAMERA

the other side

 

 

 

 

 

I think bird wings and sides are going to be the most fun, but probably the most labor intensive.

2015-08-12 MS Blue Bird flower sample aI have been watching the internet and the trend to use silk ribbon in stitching and just being so creative stitching flowers.  I collected a few pictures from the internet that I thought would inspire me and set them aside for reference. You can just google “silk 2015-08-12 MS Blue Bird flower sample bribbon flowers for needlepoint” and click on images for an unlimited supply of ideas. And since this piece had lots of cute flowers… I decided to play.

 

OLYMPUS DIGITAL CAMERA

OLYMPUS DIGITAL CAMERA

I also had purchased Bullion needles from local shop earlier this year.(https://sudukc.wordpress.com/2015/02/08/hari-kuyo-broken-needle-celebration/) and wanted to play with them too. These are from Colonial needle and come in two types (of course I have them both): Tapestry or Sharp Point Bullion needles.  There are three needles packaged in a plastic tube for storage; there are a 3 1/2 inch, 5 inch and 7 inch needle in each package and they are equivalent to a #20 Tapestry needle in size. While I would like to see smaller sized needles available, we will play with these.

And of course there were more thread changes to be made. I have spent the last few days gathering up threads, silk ribbons and beads I think may work. I have a stash of silk ribbons for that future day of fun…so today has become that future days /weeks of fun.

OLYMPUS DIGITAL CAMERA

Silk Ribbons

A word about silk ribbons: Most silk ribbons we are using to stitch with come in the following sizes: 2mm-4mm-7mm-13mm; 2mm is the narrowest silk ribbon.  Most common seems to be 4mm (but remember I am flying by the seat of my pants and have not done much research into this technique yet.) and it is what I have the most supply in my stash at the moment. Several companies are producing silk ribbon:

Dinky Dyes: 4-7mm (http://dinkydyes.com/index.html)

Gloriana Threads: 4-7-13mm (http://www.glorianathreads.com/)

Planet Earth Fibers: 4-7-10-13mm (http://www.planetearthfiber.com/)

Rainbow Gallery Splendor Silk Ribbon: 4mm (http://www.rainbowgallery.com/index.html);

River Silks: 4-7-13mm (http://www.riversilks.com/index.html);

Thread Gatherers: 4-7mm (http://www.threadgatherer.com/);

Treenway Silks: 2-3.5-7-13mm (http://www.treenwaysilks.com/index.php);

YLI: 4-7mm (http://www.ylicorp.com/index.aspx)

2015-08-12 MS Blue Bird silk ribbon on spoolI am sure there are others, but these are in my stash; I’ve seen one on a spool and would love to find it someplace…I just think the little spools are too cute. Anyone know where these can be purchased?

And I would be remiss if I did not tell you about Florilegium…If you are in the Midwest or plan on being here; plan a trip to Weston, Mo (http://westonmo.com/?page=home). It is a quaint little town about 35 miles (45 minutes) north of Kansas City or 30 minutes from KCI airport. Great shops and food.  Make sure it is a week-end, that’s when most all shops are open. But DO NOT MISS seeing Florilegium (http://florilegium.com/), even if you have to call ahead and make an appointment for early in the week visit; this is eye candy overload for the creative soul. Gretchen is the owner and Kathy, her friend, are the two sweetest ladies around. But the reason I mention them here is that if you need a silk ribbon Gretchen dyes them and has beads, embellishments and ribbons forever.  It really is eye candy overload! Every time I go in there I feel like a kid in a candy store and when I leave I am exhausted and know I missed half of what was right in front of me.

But I digress…I have a few books that I need to look through too. I’ll post again in a day or two with a list of books I have. Even though I prefer a book in front of me, the internet is always a good source and sometimes you can find videos that allow you to see the stitch being created.

But first I am going to Basketweave the backgrounds of these pieces. Yes I am going to use Silk and Ivory in medium color blue. Remember I use #20 or #22 tapestry needle…it works. I will Basketweave right up to the flower edges and if I have to go back and fill in I’m sure it will not be noticeable for all the flowers.

Thank you for stopping by… I hope you find time to stitch today!

ttfn…sue